PDA

View Full Version : Whats the difference



Spire
30-03-2007, 16:00
Between a screw and a bolt? Do you know?

von41
30-03-2007, 16:47
Between a screw and a bolt? Do you know?

erm well.. a screw = a shag!... un ya bolt just after.. ;)


or


screws.. you use a screwdriver.. flat or cross head..

and a bolt.. you use a spanner/socket wrench.. allan key.. :)

Tina
30-03-2007, 19:58
How did he pass his theory? ;)

ha ha what Von said'

Spire
30-03-2007, 20:28
It aint got anything to do with the type of head. Its whether the thread runs all the way up the shaft or not. Bolt the thread runs up to the head on a screw it stops part way.

Anyone else got any sad bits of trivia they would like to share with us?

von41
30-03-2007, 21:17
It aint got anything to do with the type of head. Its whether the thread runs all the way up the shaft or not. Bolt the thread runs up to the head on a screw it stops part way.

Anyone else got any sad bits of trivia they would like to share with us?

erm.. spire mate!!.. the bolt i just unscrewed from me neck.. erm... well could swear that the thread did not go all the length of it.... but when Jake me dog brings me head back... I'll have another look at the bolt.... :)

Tina
30-03-2007, 21:21
A bolt threads into a nut whereas a screw threads into the material to be fastened.

Tina
30-03-2007, 21:22
Bet that goes straight over his head! :)

Bikerchickett
30-03-2007, 21:42
This is amusing :D

BALLISTIX
30-03-2007, 22:08
Anyone can screw.
But only Bernie can give ye the bolt,,,erm,,,,i think.

Tina
30-03-2007, 22:19
Hmmmm no reply.
see i am right..


silly billy.
girls can do this stuff aswell you know! :p

Tina
30-03-2007, 22:20
And to think he thought he was right...


lol'

Bikerchickett
30-03-2007, 22:21
Hmmmm no reply.
see i am right..


silly billy.
girls can do this stuff aswell you know! :p

Some girls can :D

Tina
30-03-2007, 22:23
yes we can! :D //
C90 experience rocks

Bikerchickett
30-03-2007, 22:27
yes we can! :D //
C90 experience rocks

It sure does... i got pretty good at filing metal thingys !!!!

BALLISTIX
30-03-2007, 22:53
But T, not all bolts require a nut.


<legs it> well hops it tbh.

Bikerchickett
30-03-2007, 23:12
But T, not all bolts require a nut.


<legs it> well hops it tbh.


Some bolts need an eye thingy !

or even a Bernie..... (Bernie the bolt please)

Spire
30-03-2007, 23:17
How about this one - What restrictions and exceptions apply when there is a solid white line in the centre of the road?

And no it dont mean beware drug users in the area!
:rolleyes:

Bikerchickett
30-03-2007, 23:24
How about this one - What restrictions and exceptions apply when there is a solid white line in the centre of the road?

And no it dont mean beware drug users in the area!
:rolleyes:




Double white lines where the line nearest you is solid. This means you MUST NOT cross or straddle it unless it is safe and you need to enter adjoining premises or a side road. You may cross the line if necessary to pass a stationary vehicle, or overtake a pedal cycle, horse or road maintenance vehicle, if they are travelling at 10mph or less.


*i loves google*

parapanfan
30-03-2007, 23:27
But T, not all bolts require a nut.


I think you'll find that if a 'bolt' doesn't need a nut it's called a machine screw.

I believe screws are tapered and bolts are not?

Spire
31-03-2007, 00:57
Well google aint got it quite right then

parapanfan
31-03-2007, 06:11
This is from the Highway Code



108: Double white lines where the line nearest you is solid. This means you MUST NOT cross or straddle it unless it is safe and you need to enter adjoining premises or a side road. You may cross the line if necessary to pass a stationary vehicle, or overtake a pedal cycle, horse or road maintenance vehicle, if they are travelling at 10mph or less.
Laws RTA sect 36 & TSRGD regs 10 & 26

von41
31-03-2007, 08:12
........ are you sitting some sort of exam or summat ?

Ho!! and not all screws are tapered.. a "grub screw" is not... and some times it requires a nut ..(lock nut)..that is......:spin:

Bikerchickett
31-03-2007, 09:01
Well google aint got it quite right then

It was googled out of the Highway Code !

parapanfan
31-03-2007, 09:47
grub screw ( ′grəb ′skrü ) ( design engineering ) A headless screw with a slot at one end to receive a screwdriver

Not likely to have a nut, lock or otherwise.

See

http://euler9.tripod.com/bolt-database/boltdef.html

for definite definitive definition

von41
31-03-2007, 10:14
grub screw ( ′grəb ′skrü ) ( design engineering ) A headless screw with a slot at one end to receive a screwdriver

Not likely to have a nut, lock or otherwise.

See

http://euler9.tripod.com/bolt-database/boltdef.html

for definite definitive definition


para... (grub screw)... is a general term that i used.. to be specific it would no doubt come under the heading of.... "headless socket screw"

parapanfan
31-03-2007, 10:18
Typical male oriented subject this innit?

You could say it's a thread about screws and nuts.

von41
31-03-2007, 10:32
Typical male oriented subject this innit?

You could say it's a thread about screws and nuts.

agreed... we are all ..... "NUTS".. ;)

Spire
31-03-2007, 12:24
There is one other element that you missed.

It also means no parking

BALLISTIX
31-03-2007, 12:50
I think you'll find that if a 'bolt' doesn't need a nut it's called a machine screw.

I believe screws are tapered and bolts are not?

And I think u'd get some pretty funny looks if you went to a parts shop/dealers and asked for some cylinder head machine screws or some 'big end' machine screws oh :yes:

Tina
31-03-2007, 18:18
well you would look pretty saft parking in the middle of the road now wouldn't you! :p

Bikerchickett
31-03-2007, 21:28
well you would look pretty saft parking in the middle of the road now wouldn't you! :p

Well said T :yes:

Hopester
01-04-2007, 15:18
what a dull thread:confused:

Tina
01-04-2007, 15:28
Ha ha ha what a dull thread.. i saw what you did there Hopey

von41
02-04-2007, 08:27
< blinks... hands hopey some Brasso.. polish away dude.. > ;)

Bikerchickett
02-04-2007, 10:10
what a dull thread:confused:


Brightens it up a bit

:D

Spire
02-04-2007, 15:47
And your contribution was so interesting :p